Hebei Mingmai Technology Co.,Ltd
Thermoplastic Welder Technology
Add to Cart
Packaging & Delivery:
Selling Units:Single item
Single package size:35X27X27 cm
Single gross weight:18.000 kg
Lead Time:
| Quantity(Sets) | 1 - 5 | >5 |
| Est. Time(days) | 10 | To be negotiated |
Application:
Tensionmeter is a new type of tensile testing equipment developed by our factory, Simple operation, lightweight and portable. It is for peeling, shearing and tensile tests of geomembrane, geotextiles and films. It can be used in any field test, but also in the factory.
Operating Steps:
1. Before starting the test, please prepare the test samples according to relevant standards and regulations.
2. Put the device on a flat place or on the tabletop and open storage case.
3. Take out the power cord, check and confirm that there is no foreign body blocking the movable plate.
4. Connect enclosed power cable to socket; connect the machine to the line/mains.
5. According to the size of the test samples, please confirm that the movable plate is in the correct position. If the movable plate is not in the correct position, press the FORWARD/ BACKWARD operation button to adjust to the correct position and then press the stop button. This machine’s jaw spacing is 5-300 mm.
6. Use a wrench to loosen the 4 test sample compression screws, place the test samples in place and lock the 4 test sample compression screws. When locking the 4 test sample compression screws, note that lock the left and right two screws at the same time, do not lock one side of the screw and then lock the other side of the screw. Please lock both sides of the screws slowly and keep the test sample platen balanced basically.
7. After fixing the test sample, please re-check the drive shaft, fixed slide bar, movable plate without any foreign objects impede the operation; press the ZERO button, press the confirm button to the residual number Zero, press the FORWARD button, the device starts running, you can see up and down rows of data in the screen window constantly changing, according to the corresponding standard comparison of the above row of screen data, when the corresponding standard data, press the stop button to stop the test, then the top line of the screen shows the maximum value of this test. If the data in the first line is smaller than the corresponding standard data, the test can be continued until the data in the first line reaches the corresponding standard or no longer changes. The data in the second line is smaller than the data in the first line, then press the stop button to stop the test, the first line of the screen data is the maximum data of the test sample, please confirm the test sample is qualified according to the corresponding standard.
8. After the test is finished, please loosen 4 test sample compression screws and remove the test sample; if no longer tested, press the BACKWARD button to move the movable plate home.
9. After testing, turn off the ON/OFF switch; unplug the power plug, if you can please apply some oil on drive shaft and fixed slide bar.
Specifications:
| Voltage | 230V |
| Frequency | 50HZ |
| Power | 200W |
| Jaw spacing | 5-300mm |
| Tensile load | max 200N |
| Sample width | max 100mm |
| Sample thickness | <10 mm |
| Testing speed | 80mm/min |
| Size(LxWxH) | 700x220x120 mm |
| Net weight | 12 kg |
After-sale service:
We always provide high quality products and workable price for every clients and have won the confidence and approval.
Machine Quality Guarantee : 24 months.--- If any parts broken or does not work under normal operating, we are free to provide.