90 - 315MM con tubo de certificacion CE que une la maquina dobladora automatica de metal
Automatic Metal Bending Machine Introduction:
- The MM-TECH V-CNC series automatic hydraulic butt welding machines are applied to joint PE, PP, PPR and PVDF pipes and moulded fittings.
- Selection of components with a long service life ensures a low maintenance and repair, friendly and reliable operation.
Automatic Metal Bending Machine Specification:
| Welding Range | 90mm-315mm |
| Reducing Inserts | 90mm-110mm-125mm-140mm-160mm-180mm-200mm-225mm-250mm-280mm-315mm |
| Ranges of Application | PE,PP and PVDF |
| Working Voltage | 230V±10%,50/60Hz |
| Total Power | 5.25KW |
| Heating Plate | 3KW |
| Planning Tool | 1.5KW |
| Hydraulic Unit Motor | 0.75KW |
| Environment Temperature | -10°~45° |
Automatic Metal Bending Machine Features:
- The CNC hydraulic control box is available for all MM-TECH basic model machines, covering the size from O.D 50mm through O.D 1200mm.
- Fully encased control box makes the protection level up to IP 54.
- Due to the unique powertrain, it could not only create sufficient hydraulic power during welding procedure, but also it makes sure the precise control.
- And most importantly, it greatly reduce the weight of control box. And the servo-motor applied significantly reduce the failure possibility and maintenance cost.
- All connections sockets are located at the back of hydraulic control unit, including sockets for trimmer tool and heating plate. No additional power distributor is needed.
- Various welding standards (DVS, ISO, WIS, etc.) could be pre-installed by different languages upon your request.
- All welding reports could be saved immediately to internal memory with a capacity of 2000 reports after welding accomplished, or print the report.
- Meanwhile, it is available for downloading through the USB interface.
- All MM-TECH V-CNC series hydraulic control box is featured with PLC touch screen, extremely user-friendly RFID access technology.
- Troubleshooting and program upgrade are available for remote control.
- When heating plate hook up with machine chassis, inserting or release the heater will be controlled remotely by hydraulic unit, which is same as trimmer.
- These characteristics prevent the operators from being injured.
SWT-V315H includes:
- A machine body with 4 clamps and 1 automatic console with quick connector;
- A Teflon coated heating plate with separate temperature control system;
- A electrical milling cutter;
- Hydraulic hoses with quick couplings;
- Support for milling cutter and heating plate.
Automatic Metal Bending Machine Application:
After-sales Service:
We always provide high quality products and workable price for every clients and have won the trust,
enjoy a good reputation in the market.
Machine Quality Guarantee: 24 months.--If any parts broken or does not work under normal operating,
we provide them for free!
